PHBR-100 type magnetic Bloch hardness testerDetailed product description：

PHBR-100 Magnetic Brow Hardness Tester

*The world's first Brinell hardness tester designed based on the principles of Rockwell hardness test and Brinell hardness test, which can test metal hardness with only one side contact of the specimen.
*By relying on magnetic force to attach the Bloch hardness tester probe to the steel surface, there is no need to support the sample.
*The testing accuracy meets the standards of GB/T230/T231 and ISO6508/6506, and is not lower than the corresponding desktop hardness tester
*Testing is fast, easy, and does not require sampling. As long as there is a flat or curved surface where the instrument can be placed, any large workpiece can be tested.
*The test values meet the product standards or drawing requirements of most workpieces without the need for conversion.
*In most cases, it can replace the low precision Leeb hardness tester.

Scope of application
*Used for testing steel workpieces.
*Large workpieces that can be tested and assembled, cannot be cut, and are inconvenient to move, such as large molds, steel plates, steel pipes, steel structures, boilers, pressure vessels, metal pipelines, etc
*Can test the hardness of welds and heat affected zones.
*It can directly test flat specimens and add an optional adapter to test corresponding diameter pipe specimens.
*It can be tested on a horizontal plane, as well as on inclined or vertical surfaces.

Main technical parameters
Initial test force: 10kg
Rockwell test force: 60kg, 100kg, 150kg
Brinell test force: 62.5kg, 125kg, 187.5kg
Force application method: screw force application
Pressure head: 120 ° diamond cone, Ø 1.588mm, Ø 2.5mm hard alloy ball
Maximum magnetic attraction:>350kg
Test scope: 15 scales including Rockwell hardness HRC, HRB, HRA, etc
Four test conditions including Brinell hardness HB 30, HB 10, HB 5, HB 2.5, etc
Resolution: Rockwell hardness 0.5HR, Brinell hardness indentation diameter 0.01mm
Accuracy: Complies with GB/T230/T231, ISO6506/6508
Minimum sample size: 60 × 180mm
Net weight: 4.9kg
Total weight of packaging: 8.2 kg