HB-2 Hammer type Brinell hardness testerDetailed product description：

The HB-2 hammer type Brinell hardness tester test method uses a steel ball of a certain diameter to be subjected to an instantaneous impact load, causing the steel ball to sink into the test piece and the standard hardness test block, thereby obtaining the indentation on the standard test block and the test piece. By simply measuring and checking the two indentations, the hardness value of the test piece can be quickly obtained, and the tensile strength of black and non-ferrous metals can be approximately and quickly determined.

Standard attachment for HB-2 hammer type Brinell hardness tester:

1. 1 host
2. Two HB5/750/30 200 ± 50 Brinell test bars
3. One 15X measuring microscope
4. One user manual

The scope of use of HB-2 hammer type Brinell hardness tester:

1. The Brinell hardness and tensile strength values of steel in its natural or annealed state (limited to non austenitic steel).
2. The Brinell hardness and tensile strength values of steel in the refined quenched or quenched tempered state (limited to non austenitic steel).
3. Brinell hardness value of cast iron.
4. Brinell strength value of brass castings.
5. Brinell hardness value of rolled brass.
6. The Brinell hardness value of copper.
7. Brinell hardness value of tin bronze alloy.
8. Brinell hardness value of aluminum alloy castings