JD204 series power transmitterDetailed product description：

JD204 series transmitter

characteristic

Purpose: It is a type of input component for analog signal acquisition in remote control devices, computer inspections, and automation control systems. It is used to isolate and transmit electrical parameters such as current, voltage, frequency, power, power factor, and electrical energy in the power grid into linear DC analog signals. It can be widely used in power systems, industrial systems, building systems, and other industrial and coal mining enterprises.

Measurement: single-phase AC, three-phase three wire, three-phase four wire
Voltage transmitter, current transmitter, power transmitter, power factor transmitter, frequency transmitter, electrical energy transmitter, etc
Accuracy: ± 0.2% RO

Technical parameters of JD204 series power transmitter

AC input current: 5A, 1A Voltage: 600V, 300V, 150V, 120V, 100V
Input load voltage transformer PT: ≤ 0.1VA Current transformer CT: ≤ 0.2VA
Input overload of 750Vrms continuously
Overload capacity can withstand 2 times the rated value (continuous) and 10 times the rated value (10s)
Accuracy communication: ± 0.2% RO
Response time ＜ 400ms
Output voltage 0~10Vdc, 0~5VDC (load resistance=input voltage/10mADC)
Output current 0~20mAdc, 4~20mAdc (load resistance=10Vdc/output current)
Output ripple ≤ 0.5% RO (peak to peak)
Working environment temperature and humidity: 0~50 ℃/less than 80% relative humidity (non condensing state)
Storage environment temperature and humidity -20~70 ℃/less than 70% relative humidity (non condensing state)
Using power supply AC220 ± 10%, 50Hz can be customized with special specifications (DC12V, 24V, 48V, 110V, 220V ± 20%)
Isolation input/output/power supply/enclosure
Power consumption is about 2VA
Shell material ABS fireproof material
The weight order is about 450 grams, and the weight order is about 650 grams
Compressive strength AC2KVrms/min
Insulation impedance greater than 100M Ω at DC500V
Dimensions: Single phase 112 (L) × 65 (W) × 70 (H) mm, three-phase 119 (L) × 109 (W) × 75 (H) mm
Installation method: 35mm standard guide rail, base screw installation

JD204I, JD204I2, JD204I3 AC current transmitters
JD204U, JD204U2, JD204U3 AC voltage transmitters
JD205I, JD205I2 DC current transmitter
JD205U, JD205U2 DC voltage transmitter
JD204P three-phase active power transmitter
JD204Q three-phase reactive power transmitter
JD204H power factor transmitter
JD204F frequency transmitter