P-V power signal transmitterDetailed product description：

P-V power signal transmitter

Purpose: The power signal transmitter can measure active power, reactive power, active and reactive power combinations, isolate and transmit output analog signals
Measurement: single-phase system, three-phase three wire, three-phase four wire
Accuracy: ± 0.2%
Output: Analog signals such as 0~20mAdc, 4~20mAdc, 0~10Vdc, 0~5VDC, etc

Technical parameters of P-V power signal transmitter

Input voltage: 100V, 150V, 220V, 380V, 600V Current: 1A, 5A
Input load voltage transformer PT: ≤ 0.1VA Current transformer CT: ≤ 0.2VA
Allow overload voltage to continue at twice the nominal value; Current multiplied by 2 times the nominal value continuously; Current multiplied by 10 times the nominal value for 10 seconds
Accuracy ≤± 0.2% RO
Response time ≤ 400ms
Output voltage 0~10Vdc, 0~5VDC (load resistance=input voltage/10mA)
Output current 0~20mAdc, 4~20mAdc (load resistance=10V/output current)
Output ripple ≤ 0.5% RO (peak to peak)
Working environment temperature and humidity: 0~50 ℃/less than 95% relative humidity (non condensing state)
Storage environment temperature and humidity -20~70 ℃/less than 70% relative humidity (non condensing state)
Using power supply AC220 ± 10%, 50Hz can be customized with special specifications (DC110V, 220V ± 20%)
Isolation input/output/power supply/enclosure
The power consumption is approximately 3W DC and 4VA AC
Shell material ABS fireproof material
Weight approximately 650 grams
Compressive strength AC2KVrms/min
Insulation impedance greater than 100M Ω at DC500V
Dimensions 119 (L) × 109 (W) × 75 (H) mm
Installation method: 35mm standard guide rail, base screw installation