HD-G series DC signal isolator/distributorDetailed product description：

HD-G series DC signal isolator/distributor

signal isolator
Measurement: DC voltage, DC current, thermistor, thermocouple signal, potentiometer, etc
Accuracy: ≤± 0.2% RO
Isolation method: Input, output, and power are completely isolated, with strong anti-interference ability
Input/Output: 0~5V, 0~10V, 1~5V, 2~10V, 4~20mA, 0~20mA, etc
Working power supply: AC/DC24~265V
One in one out, one in two out, one in three out, one in four out

detailed description:

Overview
The HD series DC signal isolator/distributor is an instrument used in automation control systems to transmit, convert, isolate, transmit, and calculate various industrial signals. It can be used in conjunction with various industrial sensors to retrieve parameter signals, isolate and transmit them, and meet the needs of users for local monitoring and remote data acquisition. Widely used in industrial measurement and control systems such as mechanical, electrical, telecommunications, power, petroleum, chemical, steel, sewage treatment, and building construction for data acquisition, signal transmission conversion, PLC, DCS, etc., it is used to improve and supplement the system's analog I/O plug-in functions, increase system applicability and on-site environmental reliability.

Technical parameters
Accuracy; ≤±0.2%RO
Input measurement: DC voltage, DC current, thermistor, potentiometer, etc
Output measurement: Analog signals such as 0~20mAdc, 4~20mAdc, 0~10Vdc, 0~5VDC, etc
Linearity: ≤± 0.1% RO
Full scale calibration: ≤ 20% RO
Zero point calibration: ≤ 10% RO
Isolation strength: 1500Vdc (1 minute) or AC peak power supply, input, output 1, output 2 are completely isolated in all four directions
Working power supply: AC/DC24~265V ± 10%
Power consumption: AC approximately 4VA, DC approximately 4W
Response time: ≤ 400msec
Working environment: -10~60 ℃/less than 95% relative humidity (non condensing state)
Storage environment: -20~70 ℃/less than 70% relative humidity
Output ripple: ≤ 0.2% R.O. (peak to peak)
Output load: 0~10Vdc (load resistance=input voltage/10mA); 4~20mA (load resistance=10V/output current)
Shell material: ABS fireproof material
Installation method: 35mm standard guide rail
Dimensions: 100 (L) × 22 (W) × 112 (H) mm
Weight: Approximately 200 grams