CONscan30 pen type conductivity meterDetailed product description：

The CONSCAN series waterproof pen type conductivity meter has three models: CONSCAN 20/30/30, which are suitable for measuring the absolute conductivity value of liquids at the current temperature.  

Scope of application:

CONSCAN20 is used to measure the conductivity values of low conductivity liquids such as pure water and distilled water; CONSCAN30 is used to measure the conductivity values of liquids such as tap water and mineral water; The CONSCAN40 model is used to measure the conductivity value of high concentration liquids.

Automatic calibration:
The CONSCAN series has a one button automatic calibration function. During calibration, the instrument allows the use of custom solutions. You only need to set the corresponding conductivity value in the instrument and immerse the electrode sensor in the solution. Press the calibration button, and the instrument will automatically calibrate and store the calibration value, which will not be lost even if the power is turned off.

Data locking:
When measuring a sample solution, in order to facilitate reading the measurement results, you need to keep the measurement values for a period of time. The data locking function of the CONSCAN series provides you with convenience. When in use, when the measured value stabilizes, press the HOLD key to lock the display value of the instrument.  

Automatic shutdown:
The CONSCAN series has two shutdown modes: manual or automatic. When the instrument is turned on, it enters the measurement state. If you do not press any buttons on the instrument within 8 minutes, the CONSCAN series will automatically turn off the power.  

Waterproof performance:
The instrument has good waterproof performance, and each structural connection point in the housing has undergone waterproof treatment, which will not affect its use even when placed in water. At the same time, the weight of the instrument is calculated by suspension force, and it can float up on its own when it falls into the water.


Technical parameters of CONscan30 pen type conductivity meter

Instrument model		CONscan20	CONscan30	CONscan40
Conductivity measurement range		0.0~199.9uS/cm	0~1999uS/cm	0.00~19.99uS/cm
Conductivity measurement accuracy		±1% F.S	±1% F.S	±1% F.S
display resolution		0.1uS/cm	1uS/cm	0.01uS/cm
Instrument calibration point		one o'clock
Use calibration solution		146.6uS/cm	1408uS/cm	12.85uS/cm
Temperature compensation coefficient		2%/℃
Temperature compensation range		---
Battery Type		G13-A CNB 1.5V lithium battery, 3 units
Battery usage time		About 150 hours
Overall dimensions		180 (length) mm x 30 (diameter) mm
Instrument weight		85g

CONscan30 pen type conductivity meter（No image available）