FE-B type iron colorimeterDetailed product description：

The FE-B iron colorimeter fully embodies the foundation of rapid analysis. Whether using visual colorimetry or titration, reliable results can be obtained quickly. It is like a portable laboratory that can perform routine water quality testing in real time, which can significantly save time and costs.

Test scope: Determine the concentration of total iron ions in water samples at 0.1-0.2-0.3-0.5-1.5-1.5-2.0-3.0 mg/l
Test frequency: 50 times/box

FE-B type iron colorimeter features
☆ Measured by visual colorimetry or titration, easy to operate.
It takes 2-10 minutes to complete the analysis of a water sample, which is fast and efficient.
The measurement results are reliable.
All reagents and accessories are built-in and do not require additional preparation.
☆ Low analysis cost.
☆ Small size, light weight, easy to carry.
☆ Suitable for real-time on-site water quality testing of sea and fresh water.

Operation Method
Colorimetric method
Rinse the colorimetric tube twice with pool water, then take a water sample to the mark. Add 4 drops of iron reagent (I) and 1 glass spoon of iron reagent (II) to the tube, shake to dissolve, let it sit for 2 minutes, then add 7 drops of iron reagent (III), shake well, and after 5 minutes, visually compare the color with the standard color card from top to bottom. The color code with the same color tone is the iron content (mg/L) in the water sample. If observed with one eye color comparison, the effect is better.

Explanation: If the pool water is turbid, take a sample and let it stand for a few minutes. After the water sample is clear, take the upper clear liquid for testing.

Packing list: 1 bottle each of iron reagents (I), (II), and (III), 1 test tube, 1 dropper, 1 color chart, and 1 glass spoon.

Note:
Some indicators may have special operational requirements, please read the instructions on the back of the color chart carefully before use.

Application Areas
A Aquaculture B Agriculture C Industrial Water D Printing and Dyeing E Chemical and Light Industry F Building Materials and Decoration G Electroplating Surface Treatment H Food Processing I Boiler Water/Cooling Water J Sewage/Wastewater Discharge and Treatment K Environmental Analysis L Drinking Water and Tap Water Processing