ZBM Magnetic holding pulse solenoid valveDetailed product description：

ZBM magnetic holding pulse solenoid valve

Product Features:

Leading technology with reliable performance
Pulse maintains flexible opening
Permanent magnet technology is efficient and energy-saving
Special membrane has an extremely long lifespan

Application scope:

Widely used in IC card gas meters, water-saving irrigation, water meters and automatic sensing sanitary ware, automatic irrigation for landscaping, drip irrigation and other automated controls.

Working Principle:

The ZBM magnetic holding pulse solenoid valve adopts advanced pulse and permanent magnet technology. It only needs to switch the electrode contacts of the pulse through the controller to change the switching state of the solenoid valve. When the controller sends an electric pulse, it drives the valve core to overcome the permanent magnetic force and move up and down. After the valve disc is in place, it is in a self holding state under the action of the permanent magnet. At the same time, high-end shielding technology is used to prevent external interference

Technical parameters of ZBM magnetic holding pulse solenoid valve:

Principle structure: Pilot operated diaphragm
Fluid range: water, gas (non corrosive), etc
Work pressure: 0.05-1.0Mpa
Maximum pressure: 1.5Mpa
Valve body material: brass, 316 stainless steel
Temperature: 0 ℃~60 ℃, in places where the relative temperature does not exceed 85%
Power supply: Pulse 6-24V DC, pulse width 60-80ms. Other voltages can be customized

External dimensions:

Specification Model	ZBM10	ZBMM15	ZBM 20	ZBM 25	ZBM 35	ZBM 40	ZBM 50
Interface (G)	3/8"	1/2"	3/4"	1"	11/4"	11/2"	2"
CV value	four point five	four point five	seven point six	twelve	twenty-two	thirty	forty-eight
Long (A)	sixty-six point five	sixty-six point five	seventy-five	ninety-six	one hundred and thirty-one	one hundred and thirty-one	one hundred and sixty-five
Width (B)	forty-eight	forty-eight	fifty-eight	seventy	ninety-six	ninety-six	one hundred and twenty
High (C)	eighty-two point five	eighty-two point five	eighty-eight	one hundred and one	one hundred and sixteen	one hundred and sixteen	one hundred and forty-two

Note: If the fluid contains impurities, please install a suitable mesh filter on the front pipeline of the solenoid valve, and there should be no solidification or crystallization phenomenon;
2. This valve is normally installed horizontally. If vertical installation is required, please provide instructions before placing an order or consult separately.