EM33030A Series DDS Digital Synthesis Function Signal GeneratorDetailed product description：

EM33030A Series DDS Digital Synthesis Function Signal Generator (EM33030A 3MHz)

The main electrical parameters of the digital synthesis signal source and instrument are all adjusted by debugging software It has automatic calibration function. Simultaneously possessing all the functions of an analog signal source. The minimum output signal can be less than 1mV. Its characteristics are high precision, high stability, high reliability, low distortion, and low price.

Performance characteristics

technical indicators
function
Ten types of function waveforms: sine wave, square wave, triangular wave, pulse wave, ramp up, ramp down, exponent up, exponent down, TTL level, DC level.
It has linear sweep frequency, logarithmic sweep frequency, and external amplitude modulation functions. External testing of 100MHz frequency meter function. Simultaneously display frequency and amplitude.

performance metrics
1. Frequency characteristics: sine wave: 0.1Hz~3MHz square wave: 0.1Hz~3MHz other wave types: 0.1Hz~3MHz highest resolution: 6-digit number
2. Signal characteristics: Square wave rise time<20ns Pulse wave duty cycle: 10%~90% DC bias: -10V~+10V TTL level rise time<20ns
3. Output amplitude: 1mVp-p-20Vp-p Output impedance: 50 μ 3-digit display
4. Sweep frequency range: 1Hz~3MHz Minimum step: 1Hz Sweep rate: 10ms~10s
5. External amplitude modulation: Carrier frequency: 0.1Hz~3MHz Input impedance: 1K Ω Modulation waveform: Internal waveform Amplitude modulation depth: Controlled by local output amplitude and external modulation signal amplitude
6. Frequency meter: Frequency measurement range: 1Hz~100MHz