EM32050 Type Dual Channel 5MHzDDS All Digital Synthesis Function Signal GeneratorDetailed product description：

32 series DDS all digital synthesis function signal generator (EM32050 dual channel 5MHz)

The first domestically adopted large screen LCD Full Chinese or English menu, displaying all major parameters simultaneously Click freely Arbitrary adjustment, extremely convenient operation and use.
Truly digitized, all electrical parameters of the instrument are adjusted by debugging software There is not a single adjustable component inside the entire instrument. The instrument has an automatic calibration function. Ensure the stability of the instrument uniformity. Reliability.
Capable of communicating with a PC Fully equipped The highest cost-effectiveness among similar products; Standard RS-232 serial interface.

Performance characteristics
Large screen LCD, full Chinese or English menu, displaying multiple parameters simultaneously.
Equipped with output protection circuit.
The minimum output signal is 1mV

technical indicators
1. Ten types of function waveforms: sine wave, square wave, triangular wave, rising slope, falling slope, random noise, SIN (X)/X, rising exponent, falling exponent, pulse wave.
2. Frequency characteristics: sine wave: 1uHz~5MHz square wave: 1uHz~5MHz other wave types: 1uHz~1MHz highest resolution: 0.1uHz or 8-bit digital
3. Sine wave harmonic distortion (50 W load, 1Vpp output)<20kHz -60dBc 20kHz~1MHz -50dBc 1MHz~5MHz -40dBc
4. Signal characteristics: Square wave: (50W load 1Vpp output) Rise and fall time<10ns Overshoot<5% Asymmetric 1%+20ns Pulse wave: Duty cycle: 0.1%~99.9% (<10kHz) 1%~99% (<100kHz) 3%~97% (<1MHz) Triangular wave, oblique wave: Linear (1kHz)<0.1%
5. A (main) channel output characteristics: amplitude: 2mVpp~20Vp-p output impedance: 50W sine flatness: 5% DC bias: -100%~100% peak value
6. B-channel output characteristics: waveform: internal waveform amplitude: 200mVp-p-20Vp-p output impedance: 600 W frequency range: 0.1Hz-20kHz
7. Digital pulse: Level: TTL Pulse Width tw: 10us8. Sweep frequency: Sweep frequency range: 1Hz~5MHz Minimum step: 1Hz Sweep frequency rate: 10ms~10s
9. Trigger mode: internal, external, single shot
10. FSK, PSK, ASK, BURST burst: Pulse width, interval: 10us~100s Trigger mode: Internal, external, single carrier frequency: 1Hz~5MHz Carrier waveform: Internal waveform Phase: -360~360 degrees Number of burst pulses: 1~65535
11. Internal amplitude modulation: Carrier waveform: Internal waveform (excluding square waves) Carrier frequency: 1uHz~5MHz Modulation waveform: Internal waveform Modulation frequency: 100mHz~20kHz Modulation frequency Stability: 50ppm Amplitude modulation depth: 0%~100%
12. External amplitude modulation: Input impedance: 1kW Amplitude modulation depth: Controlled by local output amplitude and external modulation signal amplitude
13. Internal frequency modulation: Carrier waveform: Internal waveform, Carrier frequency: 1Hz-5MHz Modulation waveform: Internal waveform Modulation frequency: 100mHz-10kHz Modulation frequency stability: 50ppm Frequency offset range: 1Hz-5MHz
14. Internal phase modulation: Carrier waveform: sine wave, square wave Carrier frequency: 1Hz-5MHz Modulation waveform: internal waveform
Modulation frequency: 100mHz~10kHz Modulation frequency stability: 50ppm Maximum phase offset: 360 degrees
15. Frequency meter: Frequency measurement range: 1Hz~100MHz
RS-232 interface Multiple interfaces such as RS-485 and GPIB can be optionally configured.