EM32200P dual channel high-power 20MHz DDS all digital synthesis function signal generatorDetailed product description：

Performance characteristics of EM32200P dual channel high-power 20MHz DDS all digital synthesis function signal generator

Large screen LCD, full Chinese or English menu, displaying multiple parameters simultaneously.
Equipped with output protection circuit.
The minimum output signal is 1mV, and it can communicate with a PC
Fully equipped The highest cost-effectiveness among similar products; Standard RS-232 serial interface.

Technical specifications of EM32200P dual channel high-power 20MHz DDS fully digital synthesis function signal generator

Automatic detection Correction function
Equipped with output protection circuit
Minimum output signal of 1mV
Dual channel output frequency: 1 μ Hz-20MHz

Ten types of function waveforms: sine wave, square wave, triangular wave, rising slope, falling slope, random noise SIN(X)/X、 Rising index, falling index, pulse wave.
Frequency characteristics: Sine wave: 1uHz~20MHz Square wave: 1uHz~5MHz Other wave types: 1uHz~1MHz Highest resolution: 0.1uHz Long term stability: 50ppm ((0 ° C~40 ° C)
Sine wave harmonic distortion (50 Ω load, 1Vpp output):<20kHz -60dBc 20kHz~1MHz -50dBc

Signal characteristics:
Square wave: (50 Ω load 1Vpp output) Rise time:<10ns
Pulse wave: Duty cycle: 0.1%~99.9% (<10kHz) 1%~99% (<100kHz) 3%~97% (<1MHz)
Triangular wave, oblique wave: linear (1kHz)<0.1%
A (main) channel output characteristics: amplitude (open circuit): 2mVpp~20Vpp output impedance: 50 Ω sine flatness: 5% DC bias: -100%~100% peak value
Power output:>5W
B-channel output characteristics: waveform:
Internal waveform, amplitude (open circuit): 200mVpp~20Vpp,
Output impedance: 600 Ω,
Frequency range: 0.1Hz to 20kHz
Digital pulse: Output port: ASK, synchronous output port level: TTL Pulse width: 10us-100s Interval: 10us-100s
Sweep frequency: Sweep frequency range: 1Hz-20MHz, minimum step: 1Hz
Sweep rate: 10ms~10s
Trigger mode: internal, external, single shot
FSK、PSK、ASK、BURST、 Burst: pulse width, interval: 10us-100s
Trigger mode: internal, external, single shot
Carrier frequency: 1Hz-20MHz
Carrier waveform: internal waveform
Phase: -360 to 360 degrees
Number of burst pulses: 1-65535
Internal amplitude modulation: Carrier waveform: Internal waveform (excluding square waves)
Carrier frequency: 1uHz-20MHz
Modulation waveform: internal waveform
Modulation frequency: 100mHz-20kHz
Modulation frequency stability: 50ppm
Amplitude modulation depth: 0% to 100%
External amplitude modulation: Input impedance: 1k Ω
Amplitude modulation depth: controlled by the local output amplitude and external modulation signal amplitude
Internal frequency modulation: Carrier waveform: Internal waveform
Carrier frequency: 1Hz-20MHz
Modulation waveform: internal waveform
Modulation frequency: 100mHz~10kHz
Modulation frequency stability: 50ppm
Frequency offset range: 1Hz-20MHz
Internal phase modulation: Carrier waveform: sine wave, square wave
Carrier frequency: 1Hz-20MHz
Modulation waveform: internal waveform
Modulation frequency: 100mHz~10kHz
Modulation frequency stability: 50ppm
Maximum phase offset: 360 degrees
Frequency meter: Frequency measurement range: 1Hz~100MHz
Input signal:>100mV
RS-232 interface Multiple interfaces such as RS-485 and GPIB can be optionally configured.