EM32051 Type Dual Channel 5MHzDDS Fully Digital Synthesis Arbitrary Wave GeneratorDetailed product description：

The EM32051 dual channel 5MHz DDS fully digital synthesis arbitrary wave generator adopts a large screen LCD Full Chinese or English menu, displaying all major parameters simultaneously Click freely Arbitrary adjustment, extremely convenient operation and use.
Truly digitized, all electrical parameters of the instrument are adjusted by debugging software There is not a single adjustable component inside the entire instrument. The instrument has an automatic calibration function. Ensure the stability of the instrument uniformity. Reliability.

Performance characteristics
Dual channel output.
Fully equipped The highest cost-effectiveness among similar products; Standard RS-232 serial interface, self-contained instruction set, can communicate with PC online. Equipped with any waveform editing software and a Chinese WINDOWS interface.

Technical specifications of EM32051 dual channel 5MHz DDS fully digital synthesis arbitrary wave generator
Ten types of function waveforms:
Sine wave, square wave, triangular wave, ascending slope, descending slope, random noise, SIN(X)/X， Rise index, fall index, pulse wave
Any waveform:
Waveform storage length: 32k (32768), point amplitude resolution: 14 bits, sampling rate: 100Msa/s, memory: 4 Х 32k, frequency characteristics:
Sine wave: 1uHz~5MHz, square wave: 1uHz~5MHz, other wave types: 1uHz~5MHz, highest resolution: 0.1uHz or 8-bit number, accuracy: 0.4Hz (>100Hz) 0.1uHz (<100mHz), sine wave harmonic distortion (50 μ load, 1Vpp output)<20kHz~60dBc, 20kHz~1MHz~50dBc
Square wave: (50 μ load 1Vpp output), rise and fall time<15ns, overshoot:<5%, asymmetry 1%+20ns
Pulse wave duty cycle: 0.1% to 99.9% (<10kHz), 1% to 99% (<100kHz), 3% to 97% (<1MHz)
Triangular wave, oblique wave: linear (1kHz)<0.1%
Channel A output characteristics:
Amplitude (to open circuit): 1mVpp~20Vpp (to 50 μ) 0.5mVpp~10Vpp, output impedance: 50 μ, adjustment fineness: 5%, sine flatness: 5%, DC bias: -100%~100% peak value
Channel B output characteristics:
Waveform: Internal waveform, amplitude (up to open circuit) 200mVpp~20Vpp (up to 600 μ m) 100mVpp~10Vpp, output impedance: 600 μ m, frequency range: 0.1Hz~20kHz
Digital pulse:
Output port: ASK, synchronous output port, level: TTL, pulse width tw: 10usSweep frequency:
Sweep frequency range: 1Hz~5MHz, minimum step: 1Hz, sweep rate: 10ms~10s, trigger modes: internal, external, single, FSK, PSK, ASK, BURST, burst:
Pulse width, interval: 10us~100s, trigger mode: internal, external, single shot, carrier frequency: 1Hz~5MHz, carrier waveform: internal waveform, phase: -360~360 degrees, burst pulse quantity: 1~65535
Internal amplitude modulation:
Carrier waveform: Internal waveform (excluding square waves): Carrier frequency: 1uHz~5MHz, modulation waveform: Internal waveform, modulation frequency: 100mHz~20kHz, modulation frequency stability: 50ppm, amplitude modulation depth: 0%~100%
External amplitude modulation:
Input resistance: 1k Ω, amplitude modulation depth: controlled by the local output amplitude and external modulation signal amplitude
Internal frequency modulation:
Carrier waveform: internal waveform, carrier frequency: 1Hz-5MHz, modulation waveform: internal waveform, modulation frequency: 100mHz-10kHz
Modulation frequency stability: 50ppm, frequency offset range: 1Hz-5MHz
Internal phase modulation:
Carrier waveform: sine wave, square wave, carrier frequency: 1Hz-5MHz, modulation waveform: internal waveform, modulation frequency: 100mHz-10kHz, modulation frequency stability: 50ppm, maximum phase offset: 360 degrees
Frequency meter: Frequency measurement range: 1Hz-100MHz