ZWD Integrated Vibration Temperature TransmitterDetailed product description：

ZWD vibration temperature integrated transmitter has a built-in vibration sensor and a temperature sensor, which can measure vibration and temperature in two mutually perpendicular directions. It is fixed with four screws and does not require power supply. It directly outputs signals to the instrument or transmitter without power supply. It is easy to install and should not be damaged. It has been widely used in the industrial field.

2、 Technical parameters
1. Vibration parameters:
Sensitivity (optional):
a. 50mv/mms
b. 30mv/mms
c. 20mv/mms
Frequency response (optional):
a. 5～100 Hz
b. 10～500 Hz
c. 10～1000 Hz
Natural frequency: 10Hz
Measurable amplitude: ≤ 2000 μ m (P-P)
Maximum acceleration: 10g
Output mode: 4-20mA output
Measurement direction: vertical or horizontal
2. Temperature range: -50 ℃~150 ℃. Determine the temperature range according to your needs

3、 Installation of ZWD vibration temperature integrated transmitter
Installation position: Installed vertically or horizontally on the measured vibration point, measuring motion in the X-axis and Y-axis directions, and can also measure vibration in the up and down, left and right, front and rear directions according to one's own needs
4. Selection
GW-CGQ A. Two directions (X-axis and Y-axis movement)
B. Three directions (X, Y, Z-axis movement)