XB-3 type cantilever beam force/weight sensorDetailed product description：

The elastic body is a shear or bending cantilever beam structure with a low external height and high structural strength. Used for measuring tensile or compressive forces, with strong resistance to deviation and lateral forces.  
Dustproof seal, wide range of measurement, high precision, stable and reliable performance, easy installation and use.  
Pull or press type load-bearing, suitable for industrial automation measurement and control systems such as electronic scales, scales, etc.

Main technical indicators
measurement range	0- 5 ～ 30	kg
Output sensitivity	1.5～2.0	mV/V
Straightness L	±0.02; ±0.05;	%F.S
Lag H	±0.02; ±0.05;	%F.S
Repetitive R	±0.02; ±0.05;	%F.S
Operating Temperature	-10～+60	℃
Temperature compensation range	Room temperature~+60	℃
Zero temperature influence	±0.05	%F.S/10 ℃
Output temperature impact	±0.05	%F.S/10 ℃
excitation voltage	twelve	VDC
insulation resistance	two thousand	MΩ/100VDC
Input resistance: Steel	380±5	Ω
aluminum	400±5	Ω
Output resistance	350±2/350±5	Ω
Zero point output	0～±1	%F.S
Safety overload rate	one hundred and twenty	%F.S

Electrical connection method
connection method	Plug socket number	Wire color
Input (power) positive terminal	one	red
Output signal positive terminal	two	Yellow (green)
Negative end of output signal	three	white
Input (power) negative terminal	four	Blue
block	/	black
If the plug socket number or wire color changes, please refer to the sensor calibration certificate for accuracy.