QS-2 type bridge type force/weight sensorDetailed product description：

The elastic body is a bridge structure supported at both ends and subjected to force in the middle. It has a compact structure and is used for measuring compressive forces, with strong resistance to lateral forces.  
High precision, stable and reliable performance, wide range of measurement, easy installation and use.  
Pressure bearing, suitable for industrial automation measurement and control systems for various force and weight measurements.

Main technical indicators
measurement range	0 ～ 10,20	t
Output sensitivity	1.5～2.0	mV/V
Straightness L	±0.05; ±0.1	%F.S
Lag H	±0.05; ±0.1	%F.S
Repetitive R	±0.05; ±0.1	%F.S
Operating Temperature	-10～+60	℃
Temperature compensation range	Room temperature~+60	℃
Zero temperature influence	±0.05	%F.S/10 ℃
Output temperature impact	±0.05	%F.S/10 ℃
excitation voltage	twelve	VDC
insulation resistance	two thousand	MΩ/100VDC
Input resistance: Steel	760±5	Ω
Input resistance: Aluminum	790±5	Ω
Output resistance	700±5	Ω
Zero point output	0～±1	%F.S
Safety overload rate	one hundred and twenty	%F.S

Electrical connection method
connection method	Plug socket number	Wire color
Input (power) positive terminal	one	red
Output signal positive terminal	two	Yellow
Negative end of output signal	three	white
Input (power) negative terminal	four	Blue
block	/	black
If the plug socket number or wire color changes, please refer to the sensor calibration certificate for accuracy.