C103 Digital display controllerDetailed product description：

Technical specifications of C103 digital control instrument

input signal
Analog thermocouples: B, S, K, E, J, T, WRe3~25, etc
Thermistor: Pt100, Cu50, Pt100.1
Current: 0~10mA, 4~20mA, etc. (input impedance ≤ 250 Ω)
Voltage: 0~5V, 1V~5V, mV, etc. (input impedance ≥ 1M Ω)
Remote transmission pressure resistor: 30 Ω~350 Ω (special specification)
output signal
Analog output DC 4mA~20mA (load resistance ≤ 750 Ω) DC 0~10 mA (load resistance ≤ 1.5K Ω)
DC 1V~5V (load resistance ≥ 250K Ω) DC 0~5V (load resistance ≥ 250K Ω)
Switching output relay control output: contact capacity (resistive load) - AC220V/3A; DC24V/6A (resistive load)
Communication output standard serial communication interface
Communication methods RS-232C, RS-485
Baud rate 300bps~9600bps (freely set)
Feed output DC 24V, load ≤ 30mA

Characteristics of C103 Digital Control Instrument

Measurement accuracy: ± 0.5% FS ± 1
Resolution number ± 1 word
Display range numbers -1999~9999
Display mode: Four digit high brightness LED digital display
Instrument size: 48 × 48 × 110mm
Hole size: 440+0.7 × 440+0.7 mm
Weight: 180g