SH/JW7210 Energy saving strong light explosion-proof flashlightDetailed product description：

SH/JW7210 energy-saving strong light explosion-proof flashlight

Performance:
Explosion proof type has the highest explosion-proof level and can work safely in flammable and explosive places.
High energy memoryless batteries have a large capacity, long lifespan, and low self discharge rate; Using high-power, high brightness white LED light source, the illumination distance of the lamp can reach over 100 meters, and the visible distance can reach over 5000 meters.
Using PWM pulse width modulation technology, the illumination remains consistent after 9 hours of continuous use.
Good sealing performance, able to work normally underwater at 200 meters; The imported high hardness alloy shell can withstand strong collisions and impacts.
The intelligent charger is equipped with low voltage protection and charging display device.
Exquisite structure, beautiful and lightweight, easy to operate, and convenient to carry.

Use of SH/JW7210 energy-saving strong light explosion-proof flashlight:
① When in use, hold down the switch slider and push it forward or backward to turn on or off the light fixture.
② After each use, the battery should be charged promptly to ensure that it is always fully charged; After being fully charged once, it can be used anytime within 6 months. If it is not used for a long time, it should be recharged for 4 hours every six months.
③ When the battery is about to run out during use, the brightness of the flashlight will sharply decrease. At this time, it should be stopped and charged in a safe place or replaced with a backup battery.
④ The input voltage of the charger is 220VAC and it is equipped with a built-in charging protection device. When the charger indicator light is red, it indicates normal charging, and when the indicator light turns green, it indicates that the battery is fully charged; The charging socket on the back cover of the flashlight is a small hole, just insert the output plug of the charger into the corresponding charging socket.
⑤ When replacing the battery, first use a special tool to unscrew the tail cover of the flashlight, remove the battery from the flashlight, and replace it with a new battery (note that the positive pole is facing forward).
Warning: 1. Charging must be carried out in a safe place. 2. It should be charged promptly after each use.

Three notes:
When carrying or transporting packaging, the switch must be locked to prevent accidental movement during transportation.
Regularly check and ensure that the lamp head shell is tightly connected to the sleeve body to enhance its waterproof, explosion-proof, and impact resistance capabilities.
After use in corrosive environments or seawater, the surface of the flashlight should be wiped clean.
When the flashlight malfunctions, it must be maintained by professional personnel.

Four SH/JW7210 energy-saving strong light explosion-proof flashlight technical parameters:
Rated voltage: DC7.4V
Rated capacity: 2Ah
Continuous service life of light source (LED): ≥ 100000
Continuous discharge time: ≥ 9h
Charging time: 4h
Battery lifespan: approximately 1000 cycles
Dimensions: φ 40 × 208mm
Weight: 0.3kg