JD1008 series power transmitterDetailed product description：

JD1008 series transmitter
characteristic
Purpose: It is a device that isolates and converts current and voltage parameters in the power grid into linear DC analog signals.
Measurement: single-phase, three-phase AC current/voltage
Accuracy: AC ± 0.5% RO
Output: Analog signals such as 0~20mAdc, 4~20mAdc, 0~10Vdc, 0~5VDC, etc

JD1008 series power transmitter detailed description:
Technical Specifications

Accuracy level 0.2, 0.5
Input nominal values of 1A, 5A, etc. 0.1A, 1A, 5A, etc. 100V, 300V
500V, 75mV, 1V, 10V, 100V, 300V, 500V, etc
Overdrive lasting 1.2 times 1.2 times
Instantaneous 10x/5s 2x/1s
Absorption power 0.3VA 0.3W 0.5VA 0.5W
Frequency 50, 60Hz 50, 60Hz
Output nominal value 0-20mA or 4mA-20mA or 0-5V
When the load resistance current is output: 0 ＜ RL ＜ 510 Ω; when the voltage is output: RL ≥ 5k Ω
Maximum output signal maximum value: 24mA
Basic error value with output ripple not exceeding 2 times
Auxiliary power supply AC, DC 85V~265V
Power consumption<3.5VA
Insulation strength 2kV/50Hz/1min
Response time 500mS
Communication (optional) RS485/MODBUS-RTU
JD1008-4I AC current transmitter JD1008-5I DC current transmitter
JD1008-4U AC voltage transmitter JD1008-5U DC voltage transmitter
JD1008-4I2 AC current transmitter JD1008-5I2 DC current transmitter
JD1008-4U2 AC voltage transmitter JD1008-5U2 DC voltage transmitter
JD1008-4I3 three channel AC current transmitter JD1008-4U3 three channel AC voltage transmitter
JD1008-4U2 AC voltage transmitter JD1008-5U2 DC voltage transmitter
JD1008-4P three-phase active power transmitter JD1008-4Q three-phase reactive power transmitter
JD1008-4H power factor transmitter JD1008-4D power factor angle transmitter