HZ Frequency transmitterDetailed product description：

Purpose: HZ frequency transmitter is used to measure AC frequency, isolate and transmit linear DC signals, and transmit them to remote devices, computers, automation control systems, etc.
Measurement: AC frequency 50 ± 5Hz, 50 ± 1Hz, 0~60Hz
Accuracy: ± 0.1%
Output: Analog signals such as 0~20mAdc, 4~20mAdc, 0~5, Vdc, 0~10Vdc, etc

Detailed description of HZ frequency transmitter:

Technical parameters
Input load ≤ 0.1VA
Maximum overload input capacity voltage: 2 times rated input (continuous) signal for 10 seconds
Accuracy ± 0.1% R.O
Response time ≤ 400msec
Output voltage 0~10Vdc (load resistance=input voltage/10mA)
Output current 0~20mAdc, 4~20mAdc (load resistance=10V/output current)
Output ripple ≤ 0.5% RO (peak to peak)
Working environment temperature and humidity: 0~50 ℃/less than 95% relative humidity (non condensing state)
Storage environment temperature and humidity -20~70 ℃/less than 70% relative humidity (non condensing state)
Using power supply AC220 ± 10%, 50Hz can be customized with special specifications (DC12V, 24V, 48V, 110V, 220V ± 20%)
Isolation input/output/power supply/enclosure
The power consumption is approximately 3W DC and 4VA AC
Shell material ABS fireproof material
Weight approximately 450 grams
Compressive strength AC2KVrms/min
Insulation impedance greater than 100M Ω at DC500V
Dimensions 119 (L) × 55 (W) × 75 (H) mm
Installation method: 35mm standard guide rail, base screw installation