BSY-225 Asphalt Softening Point TesterDetailed product description：

Product Description: How to Translate
The BSY-225 Asphalt Softening Point Tester is manufactured in accordance with the Product Testing Methods of the Ministry of Petroleum and the Technical Conditions for Asphalt Softening Point Measurement GB4507-84. It is used to measure the softening deformation of asphalt due to heating. The softening point of asphalt is the temperature at which it is heated and softened within a specified circular mold, and then deforms and droops due to the weight of a specific steel ball when it comes into contact with the lower support plate of the instrument.

Main technical features:

1. BSY-225 asphalt softening point tester for two parallel tests.
2. The asphalt ring mold has an inverted conical mold hole with a height of 6.35 millimeters, an upper hole diameter of 17.46 millimeters, and a lower hole diameter of 15.88 millimeters.
3. The diameter of the steel ball is 9.53 millimeters and it weighs 3.50 ± 0.05 milligrams.
4. The distance between the lower support plate and the bottom of the mold is 25.4 millimeters
5. The height marking of the heated medium is 51mm away from the template
6. The heated container is an 800 milliliter beaker with a diameter of not less than 90 millimeters and a height of not less than 140 millimeters.
7. The thermometer ranges from 30 ℃ to 180 ℃, with an interval of 0.5 ℃ per division (in accordance with the technical specifications for liquid thermometers for petroleum product testing in GB514-75).
8. Electric furnace (1000W): AC220V, adjustable furnace temperature