XST series standard centrifugal pumpDetailed product description：

XST standard centrifugal pumps are used for circulating clean and non irritating water and liquids, water supply irrigation, air conditioning system water circulation, and more.

Specifications:

The flow rate can reach 220m ³/h
Lift can reach 95m
Temperature of the extracted liquid: standard -10 ° C~85 ° C, as required -20 ° C~120 ° C
Maximum operating pressure: 12 bar (PN12)
Observe at the suction port of the pump and rotate counterclockwise
Internal Recirculation Lubrication
The locking pin groove of the mechanical seal is located in the standard type
Can be paired with flanges

Structural characteristics of XST series standard centrifugal pump

Single impeller centrifugal pump, axial suction, radial discharge
The inlet and outlet comply with EN733 (EX DIN24255) and UNI7467 regulations
The flange complies with UNI2236 and DIN2532 regulations
Pull back design; (The impeller, control valve, and motor can be removed when connecting the pump body pipeline)

XST32-125/07	XST40-125/22	XST50-160/55	XST65-160/150	XST80-200/220
XST32-125/11	XST40-160/30	XST50-160/75	XST65-200/150	XST80-200/300
XST32-160/15	XST40-160/40	XST50-200/110	XST65-200/185	XST80-250/370
XST32-160/22	XST40-200/55	XST50-250/150	XST65-200/220	XST80-250/450
XST32-200/30	XST40-200/75	XST50-250/185	XST65-250/200	XST80-250/550
XST32-200/40	XST40-250/110	XST50-250/220	XST65-250/300
XST32-250/55	XST40-250/150	XST65-125/40	XST65-250/370
XST32-250/75	XST50-125/22	XST65-125/55	XST80-160/110
XST40-125/11	XST50-125/30	XST65-125/75	XST80-160/150
XST40-125/15	XST50-125/40	XST65-160/110	XST80-160/185