LVB-110 High Voltage Current TransformerDetailed product description：

The LVB-110 current transformer is an inverted transformer. Five secondary windings are combined into a suspended ring and fixed in the oil tank on the upper part of the porcelain bushing; The secondary lead passes through the porcelain sleeve and is led out from the secondary wiring board on the base; The main insulation adopts a capacitive oil paper insulation structure. A winding is composed of a copper rod and a concentric circular tube, which are connected in series or parallel outside the oil tank. The upper part of the oil tank is equipped with a metal expander, and the side is equipped with a pressure release device for 0.35 ± 0.02Mpa blasting. There is an oil drain valve installed on the base for taking oil samples.

Main technical parameters of LVB-110 high-voltage current transformer:

Rated voltage (KV)	one hundred and ten
Polarity, rated frequency (Hz)	Reduce, 50
Rated primary current (A)	2 × 600/5 (secondary winding tap is 2 × 300/5)
Rated secondary current (A)	five
Accuracy level and combination	0.2/0.5/5P2/5P1/5P2
Rated load (VA)	50 (tap is 30)
Rated insulation level (KV)	126/185/450
Partial discharge level (PC)	≤5PC
Instrument security factor	FS≤5
Accurate limit coefficient	5P1：ALF≥20； 5P2：ALF≥15

LVB-110 High Voltage Current Transformer