JDX-110 High Voltage Voltage TransformerDetailed product description：

The JDX-110 voltage transformer is a fully sealed single-phase four winding oil paper insulation structure, with the body fixed in the oil tank. The upper and lower oil tanks are both circular structures. The porcelain sleeve is fixed on the upper part of the fuel tank with a pressure equalizing ring, and its top is equipped with a stainless steel expander, a primary wiring board, and an oil level indicator. The fuel tank is equipped with a pressure relief valve, and the lower part of the tank is equipped with a secondary outlet box, with an oil sample valve at the bottom.

Main technical data of JDX-110 high-voltage voltage transformer:

Rated voltage (KV)	Primary winding (AN)	110/√3
	Measure winding (1a1n)	0.1/√3
	Protection winding (2a2n)	0.1/√3
	Remaining voltage winding (dadn)	zero point one
Phase number, frequency (Hz)		Single phase, 50
Accuracy level and rated output (VA) of secondary winding cos Φ=0.8	winding measurement	zero point two	one hundred
		zero point five	two hundred
		one	four hundred
	Protect the winding	3P	four hundred
Accuracy level and rated output (VA) of residual voltage winding		3P level, 300
Secondary winding limit output (VA)		two thousand
Rated insulation level (KV)
Partial discharge level (PC)		≤10

JDX-110 High Voltage Voltage Transformer