JXY-2 Compass inclinometerDetailed product description：

The JXY-2 compass inclinometer is specifically designed to measure the top and azimuth angles of drilling during the drilling process. In order to control the direction and inclination of drilling and prevent drilling accidents, it is necessary to timely understand the drilling deviation situation in order to take corresponding measures. In directional drilling, it is even more important to master the required drilling direction and inclination. JXY-2 is suitable for drilling in non-magnetic rock and mineral layers with a diameter greater than 80 millimeters.

2、 Technical parameters
1. Power supply: No need;
2. Top angle measurement range: 0~30 º; Error: ± 1 º;
30～60º； Error: ± 2 º;
3. Azimuth measurement range: 0-360 º; Error: ± 4 º; (Top angle ≥ 4 º);
4. Instrument outer sleeve: diameter 75mm, length 1990mm, total weight 33kg;
5. Place two measuring frames on each instrument;
6. The maximum operating temperature of the instrument is 80 ℃;
7. Instrument sealing: able to withstand hydraulic pressure of 7Mpa;
8. Timed control: 10-110 minutes;
9. No need for cables;
10. Can only measure at a single point;
11. Can only be used in non-magnetic areas