SYD-11143 Lubricating Oil Corrosion TesterDetailed product description：

The SYD-11143 Lubricating Oil Corrosion Tester is designed and manufactured according to the requirements specified in the Chinese standard GB/T11143 "Test Method for Rust Prevention Performance of Suppressed Mineral Oil in the Presence of Water". Applicable to the test method proposed in GB/T 11143 standard, to evaluate the rust prevention ability of mineral oil with inhibitors, especially turbine oil, on iron components when mixed with water. It is also applicable to evaluate the rust prevention ability of other oil products, such as hydraulic oil, circulating oil, and liquids heavier than water, on iron components.

1、 Main technical features
1. A digital temperature controller, heater, and electric stirrer are used to form a constant temperature bath, with uniform temperature inside the bath.
2. Equipped with a timer for time control and automatic timing during sample testing.
3. With 4 sample test holes, it can simultaneously test 4 samples with high testing efficiency.

2、 Main technical parameters and indicators of SYD-11143 lubricating oil corrosion tester
1. Power supply voltage: 220V ± 10%, 50Hz;
2. Temperature control range: 0-100 ℃;
3. Temperature control accuracy: ± 1 ℃;
4. Temperature sensor: Industrial platinum resistance, division number Pt100;
5. Temperature display mode: digital display;
6. Time control range: 1 minute to 24 hours can be set arbitrarily;
7. Time display method: numerical display;
8. Temperature controlled heating power: 600W;
9. Auxiliary heating power: 1000W;
10. Mixing motor speed: 1400r/min;
11. Sample stirring speed: 1000 ± 50r/min;
12. Sample wells: 4;
13. Environmental temperature: room temperature~35 ℃;
14. Relative humidity: ≤ 85%;
15. Power consumption of the whole machine: not exceeding 1800W.