SYD-255 Petroleum product distillation range testerDetailed product description：

The SYD-255 petroleum product distillation range tester is designed according to the requirements of the Chinese standard GB/T255 "Determination of Distillation Range of Petroleum Products" and the Chinese industry standard SH/T 0121 "Technical Conditions for Distillation Range Determination Equipment of Petroleum Products". It is suitable for determining the fraction composition of liquid fuels, solvent oils, and light petroleum products according to the determination method of the national standard GB/T255.

1、 Main technical features
1. This instrument is an integrated structure with a novel design, reasonable structure, and easy use, which meets the requirements of GB/T255 standard.
2. Adopting an integral lifting mechanism, the heating furnace is easy to adjust for ascending and descending, and runs smoothly.
3. The water bath adopts a stainless steel structure, which is corrosion-resistant and durable.
4. The heating furnace adopts electronic pressure regulation technology to achieve continuous and stepless adjustment of heating power.

2、 Main technical parameters and specifications
1. Working power supply: AC 220V ± 10%, 50Hz.
2. Distillation flask: made of hard glass, heat-resistant above 500 ℃. The diameter of the bottle body is Ø 69 ± 1mm, the neck of the bottle body is Ø 16 ± 1mm thick, and the branch pipe and neck form an angle of 75 °± 3 °.
3. Temperature gauge: 0-360 ℃, with a division of 1 ℃, in compliance with the requirements of the national standard GB/T514.
4. Condensation tank: Made of stainless steel material, the condenser tube is refined with ф 16 × 1 brass tube.
5. Heating regulation: It consists of a heating device, a thyristor temperature control circuit, and a control panel. The power of the heating device is 1000W/220V, and the heating rate can be continuously adjusted.
6. Measuring cylinder and pressure iron: There are two types of measuring cylinders: 10 milliliters and 100 milliliters. Made of pressed iron carbon steel, it is pressed onto the base of the measuring cylinder to ensure that the 100 milliliter empty cylinder does not float from the water in the glass cylinder.
7. Working environment: ambient temperature -10~+35 ℃; Relative humidity ≤ 85%.
8. Power consumption of the whole machine: not exceeding 1100W.