SYD-3536A microcomputer based automatic flash point testerDetailed product description：

1、 Purpose:
The SYD-3536A microcomputer open flash point automatic tester is suitable for determining the flash point of petroleum products and asphalt with an open flash point below 79 ℃, in accordance with the methods specified in the national standard GB/T3536 "Determination of Flash Point and Ignition Point of Petroleum Products (Cleveland Open Cup Method)" and the national industry standard JTJ052 "Test Code for Asphalt and Asphalt Mixtures in Highway Engineering" T0611 "Asphalt Flash Point and Ignition Point Test (Cleveland Open Cup Method)".

The SYD-3536A microcomputer based open flash point automatic tester is used to determine the open flash point value of petroleum products. It has a fully automatic program temperature control, LCD screen display, automatic correction of atmospheric pressure and calculation of correction value. Scanning, ignition, detection, and printing of test data are automatically completed. Convenient and fast, it is an ideal substitute for imported instruments.

2、 Technical indicators
1. Working power supply: AC 220V ± 10%, 50Hz
2. Temperature measurement: Range: Room temperature~300 ℃;
Repeatability: ≤ 8 ℃;
Reproducibility: ≤ 16 ℃;
Resolution: 0.1 ℃;
Accuracy: 0.5%.
3. Basic parameters: Heating rate: in accordance with GB/T3536 standard;
Ignition method: Electronic ignition (gas flame 3-4mm ignition).
4. Environmental temperature: 10-40 ℃.
5. Relative humidity: ≤ 80%.
6. Power consumption of the whole machine: not exceeding 500W