SYD-5096 Corrosion and Corrosion TesterDetailed product description：

The design of SYD-5096 corrosion tester takes into account the three standards of GB/T11143, GB/T5096, and SH/T 0023, and is a multi-purpose instrument for analyzing corrosion of petroleum products.
This instrument can be used to evaluate the rust prevention ability of mineral oil with inhibitors, especially turbine oil, on iron components when mixed with water according to the national standard GB/T11143 "Test Method for Rust Prevention Performance of Mineral Oil with Inhibitors in the Presence of Water"; It can also be used to evaluate the corrosion degree of copper and silver in petroleum products such as aviation gasoline, kerosene, aviation turbine oil, vehicle gasoline, agricultural tractor fuel, washing solvents, kerosene, distillate fuel, and lubricating oil according to the national standard GB/T5096 "Copper Corrosion Test Method for Petroleum Products" and the industry standard SH/T 0023 "Silver Corrosion Test Method for Jet Fuel".

1、 Main technical features of SYD-5096 corrosion tester
1. This instrument is a three in one, multi-purpose rust and corrosion tester with high cost-effectiveness.
2. Using a digital temperature controller, heater, and electric stirrer to form a constant temperature bath, the temperature inside the bath is uniform; Equipped with a timer for time control and automatic timing during sample testing.
3. Equipped with standard color palettes imported from the United States, meeting the requirements for testing and comparison.

2、 Main technical parameters and indicators
1. Power supply voltage: 220V ± 10%, 50Hz;
2. Temperature sensor: industrial platinum resistance, with a division number of Pt100;
3. Temperature control range: freely set from 0 to 100 ℃;
4. Temperature control accuracy: ± 1 ℃;
5. Temperature display mode: LED digital display;
6. Temperature controlled heating power: 600W;
7. Auxiliary heating power: 1000W;
8. Time control range: 1 minute to 24 hours can be set arbitrarily;
9. Time display mode: LED digital display;
10. Sample wells: 4;
11. Environmental temperature: Room temperature~35 ℃;
12. Relative humidity: ≤ 85%;
13. Power consumption of the whole machine: not exceeding 1800W.