SYD-5096A copper corrosion testerDetailed product description：

1、 Main technical features
1. The SYD-5096A copper corrosion tester adopts a digital temperature controller, heater, and electric stirrer to form a constant temperature bath, with uniform temperature inside the bath; Equipped with a timer, it is used for time control setting and automatic timing during sample testing, and will also provide alarm prompts when the time is up.
2. The SYD-5096A copper corrosion tester has 4 sample test holes, each of which can hold one test cartridge or 3 test tube samples for simultaneous testing, with high testing efficiency.
3. Equipped with standard color palettes imported from the United States, meeting the requirements for testing and comparison.

2、 Main technical parameters and indicators
1. Power supply voltage: 220V ± 10%, 50Hz;
2. Temperature sensor: industrial platinum resistance, with a division number of Pt100;
3. Temperature control range: freely set from room temperature to 100 ℃;
4. Temperature control accuracy: ± 1 ℃;
5. Temperature display mode: LED digital display;
6. Temperature controlled heating power: 600W;
7. Auxiliary heating power: 1000W;
8. Time control range: 1 minute to 24 hours can be set arbitrarily;
9. Time display mode: LED digital display;
10. Sample wells: 4;
11. Number of measured samples: 4-12;
12. Environmental temperature: room temperature~35 ℃;
13. Relative humidity: ≤ 85%;
14. Power consumption of the whole machine: not exceeding 1800W.