TEA Gas Differential Pressure GaugeDetailed product description：

Product characteristics of TEA gas differential pressure gauge:

The magnetic link transmission mechanism fundamentally eliminates the friction generated by gear transmission.
There is no need to fill the table with liquid.
Pointer motion without inertia or drift.
All aluminum casing.
Excellent anti vibration and anti shake performance.
Can measure positive and negative differential pressure.
Multiple range options are available, with a minimum of 0~60Pa and a maximum of 0~210KPa.
2 sets of pressure interfaces (side and back)+3 installation methods=free and flexible application.

Product Usage
Measure the operation of the fan.
Detect the pressure situation in the clean room.
Check the filter screen.

Technical parameters:
Environmental temperature: -70~60 ℃
Rated pressure: -68~103KPa
Overpressure: The rubber overpressure plug was opened at approximately 172KPa.
Process connection: Both high and low pressure holes are 1/8 "spinal canal threads, two sets (one set on the side and one set on the back)
Accuracy: ± 2% FS at 21 ℃ (-125PA; 3% for 250PA type, 4% for -60PA type)
Standard attachments: 2 1/8NPT plugs, 2 1/8 "threaded rubber pipe fittings, and 3 embedded mounting screw clips with screws (also available in MP and HP options, replace the above 3 screws with mounting rings and clip ring retainers)
Weight: 460G