CLS20A type metalized polycarbonate film dielectric DC fixed capacitorDetailed product description：

Features and Applications
The CLS20A metalized polycarbonate film dielectric DC fixed capacitor uses polycarbonate film as the dielectric, and aluminum is deposited on the film as the electrode by vacuum evaporation method. It is wrapped with polyester heat-resistant tape, sealed with epoxy resin, and axially led out.
Small size, light weight, high temperature resistance, high insulation resistance, self-healing performance.
CLS20A metalized polycarbonate film dielectric DC fixed capacitor is used for logic control, delay, integration, filtering, coupling, and phase shifting circuits in precision instruments, meters, and other electronic devices.

Technical and performance indicators
Detailed specification: GB/T14004-92
Climate category: 55/125/21
Allowable deviation of capacitance: ± 1% (F); ±2%(G); ±5%(J); ±10%(K); ±20%(M)

Loss tangent of CLS20A metalized polycarbonate film dielectric DC fixed capacitor:

KHz	CR≤ 1µF	CR> 1µF
one	≤0.005	≤0.008
ten	≤0.005	-

Insulation resistance:

UR> 100V		UR≤ 100V
CR≤ 0.33µF	≥7500MΩ	CR≤ 0.33µF	≥3750MΩ
CR≤ 0.33µF	≥2500S	CR> 0.33µF	≥1250S

Voltage endurance: 1.4UR (2S)
life test
⑴. Test conditions
Test temperature: 85 ℃ 125 ℃
Applied voltage: 1.25UR, 1.25Uc
Test time: 1000H
⑵. Performance after experiment
Capacity variation: △ C/C ≤ 5%
Loss tangent increment: CR ≤ 1 µ F ≤ 0.005
CR > 1µF ≤0.003
Edge resistance: ≥ 50% of the specified value