UHZ-68-D01 basic top mounted magnetic flip column level gauge. Generally used for buried low tanks, it is sometimes also referred to as buried magnetic flip column level gauge.
The basic structure of D02 is the same as D02, except that it uses a floating ball with a smaller cross-section (diameter 75). Generally used in situations where the installation port should not be too large.

Technical parameters

Measurement range: 150-15000mm
Accuracy: ± 10mm
Working pressure: UHZ-68-C06: less than 6.4MPa, UHZ-68-C07: less than 10MPa
Working temperature: 150 ℃
Medium density: 0.5-2.0 g/cm3
Medium density difference: ≥ 150kg/m3 (measurement boundary)
Environmental vibration: frequency ≤ 25Hz, amplitude ≤ 0.5mm
Follow speed: ≤ 0.08m/s
Medium viscosity: ≤ 0.4Pa. S (viscosity conditions can be improved by jacket heating)
Process connection:
Side mounted flange: DN25/PN6.4, PN10,
Convex surface/HG20592~20635-97

Selection instructions