I. Overview
Radar level transmitter is an updated product that replaces float transmitter and RF admittance (capacitance) level transmitter. Compared with float transmitters, it is not affected by the specific gravity of the medium, and compared with RF admittance (capacitance) level transmitters, it is not affected by changes in dielectric constant. No on-site calibration is required, just input level data for configuration, which is an unparalleled advantage of any existing level measuring instrument.

2、 Structural principle
The BF600 radar level gauge uses microwave pulse measurement method and can operate normally within the industrial frequency band with low beam energy. It can be installed in various metal and non-metal containers or pipelines to perform non-contact continuous measurement of the level of liquids, slurries, and particulate materials. Suitable for situations with large changes in dust, temperature, pressure, and the presence of inert gases and vapors. No harm to human body or environment.

3、 Scope of application
Suitable for external measurements of containers, storage tanks, warehouses, etc. with complex process conditions, and not affected by changes in the physical properties of the measured medium, the two-wire technology is suitable for explosion-proof occasions. The maximum measurement distance of the pulse type level gauge for non-contact and continuous measurement is 70m.

4、 Technical parameter comparison table
Radar level gauges are designed and produced for the most complex level conditions, and are not limited by pressure, temperature, or density.