KF941X-2.5C Electric open plug-in valveDetailed product description：

KF941X-2.5C electric open plug valve

Nominal diameter: 400-2800
Nominal pressure: 0.05-0.25MPa
Applicable temperature: 200 ℃ (silicone rubber) 300 ℃ (fluororubber)
Drive mode: electric, hydraulic, pneumatic, electro-hydraulic
Applicable media: coal gas and toxic, harmful, flammable gases
Open plug-in valve CCF744X-0.5/1/2.5 CCF944X-0.5/1/2.5 FCF644X-0.5/1/2.5
Suitable temperature: 0-200 ℃
Applicable media: air, heating furnace gas, blast furnace gas, converter gas, flue gas, etc

1. The hydraulic open type plug valve consists of valve body, valve plate, expansion joint, fixed sleeve, spring return cylinder clamping mechanism (DN ≤ 1200 is the screw clamping mechanism), hydraulic motor, hydraulic station, limiter and other components. When closing the valve, start the hydraulic station to drive the spring reset cylinder, the sealing pair is disengaged, and after it is in place, the hydraulic motor will act to drive the valve plate to move from open to closed. After it is in place, the hydraulic motor stops moving, the spring reset cylinder unloads oil, the clamping mechanism automatically clamps in place, and the valve is closed. Opening the valve is the opposite.
2. The electric open type plug-in valve consists of valve body, valve plate, expansion joint, fixed sleeve, electro-hydraulic push rod spring clamping mechanism, walking electrical equipment, limit device and other components. Valve closing: The electro-hydraulic push rod drives the spring clamping mechanism to disengage the sealing pair. After it is in place, the walking electric assembly starts, driving the valve plate to move from open to closed. After it is in place, the electro-hydraulic push rod rotates in the opposite direction, and the spring clamping mechanism automatically clamps in place, ending the valve closing process. Opening the valve is the opposite.
This valve consists of a left valve body, a middle valve body, a right valve body, a screw pair, a valve plate, a sealing ring, a lever, a hydraulic cylinder, and other parts. It is also composed of a base and a supporting mechanism to form a pneumatic structure. The rubber sealing ring is embedded in the valve, which has the characteristics of high temperature resistance, good sealing performance, easy replacement, and long service life.
This valve can be remotely controlled by a single unit. It can also be remotely controlled by multiple networked devices, and in abnormal situations, it can be manually operated using the valve body device.