E8005 Sealed explosion-proof pan tilt headDetailed product description：

The E8005 sealed explosion-proof pan tilt shell is made of cast aluminum material
Vertical installation
Internal circuit sealing treatment
356 ° maximum horizontal rotation range
+45 °~-45 ° vertical rotation
Indoor and outdoor installation, all-weather use
Gear driven
Permanent magnet low-speed synchronous motor, running smoothly and reliably
Using bracket installation or base installation
Maximum load capacity 25kg
Avoid using in indoor/outdoor environments with large magnetic fields and strong voltages

Product Description
E8005 (Ex) explosion-proof electric pan tilt is a monitoring product designed with a sealing type. Its principle is to seal the parts of the equipment that may generate sparks or high temperatures in the sealing agent,
Make it unable to ignite the surrounding explosive mixture. The explosion-proof performance complies with the provisions of GB3836.1-2000 and GB3836.9-90, and is made into a poured sealed structure. The explosion-proof mark is
Exm Ⅱ T4 is suitable for explosive gas mixtures formed by explosive gases or vapors and air with surface temperature groups of Ⅱ A, Ⅱ B, Ⅱ C, T1 to T4 in factories
Place. The clever design of the sealed explosion-proof pan tilt head gives it many outstanding advantages that existing types of explosion-proof pan tilt heads do not have, especially its small size, light weight, and safety
Installation and maintenance are very convenient; Equipped with automatic functions, it brings convenience to construction and monitoring; Adopting imported shaft seals to achieve an IP56 protection level for the outer shell, and considering pouring sealing
The structure can work normally even in water for a short period of time. This reflects the development trend of explosion-proof gimbals. Cast aluminum construction meets the needs of various environments. Can be in -20
Long term stable operation under temperature conditions ranging from ℃ to+60 ℃. Capable of a horizontal speed of 6 °/sec and a maximum horizontal angle of 356 °; Vertical speed of 4 °/sec, -45 °
~+45 ° vertical rotation angle. Easy to install, simple to maintain, and can be installed using fixed brackets, bases, columns, or towers.
Certification
Explosion proof mark Exmb Ⅱ T4
Explosion proof certificate number CNEx08.1341X
Mechanical indicators
Material: Cast aluminum
Bearing method: Top load
Maximum load 25Kg
Working mode: up, down, left, right, automatic left and right back and forth.
Horizontal rotation 0-356 ° (user adjustable)
Vertical rotation+45 ° to -45 ° (user adjustable)
Horizontal rotation speed 6 °/S
Vertical rotation speed 4 °/S
Weight 6.5Kg
Transport weight 7.5Kg
Installation method: Wall mounted bracket, base, column

Electrical specifications
The input voltage is controlled by a regular AC24V pan tilt controller or a regular AC24V decoder. Auxiliary voltage 12V·
Auxiliary control power supply DC12V, 80mA (the decoder has DC12V power supply, which can generally meet the requirements)
Maximum current ≤ 2A
Power consumption in one direction ≤ 14W
Electrical connection 8-core cable
Working environment: Indoor and outdoor -35 ℃~+40 ℃, humidity<95%
wiring
When leaving the factory, the cable length is changed to 3 meters and connected to the gimbal controller or decoder. The wiring location is as follows
Brown - Upper Light Green - Automatic
Blue - Lower Black - Control Public Land
Green - Left Red - DC12V
Yellow - Right Grey - DC0V