BSM1020 Reinforced graphite gasketDetailed product description：

The BSM1020 reinforced graphite gasket is composed of a metal sprinting plate and flexible graphite particles composite, which are then punched or sheared. It has good corrosion resistance, high/low temperature resistance, good compression resilience and high strength. Various circular and complex geometric gaskets are widely used in pipelines, valves, pumps, pressure vessels, heat exchangers, condensers, generators, air compressors, exhaust pipes, refrigerators, etc.

Technical parameters and product edge wrapping form of BSM1020 reinforced graphite gasket:

Add materials	pressure resistance （N/MM2）	temperature		Compression ratio (%)	Rebound rate (%)
		In an unoxidized state	Under oxidation state
	≥48	-10-450	-10-550	30-35	15-20
SS304, SS316 sprint board	≥48	-240-450	-200-600	30-35	15-30
SS304, SS316 tablets	≥48	-240-450	-200-600	30-40	10-15
Ss304, mesh plate	≥48	-240-450	-200-600	40-50	15-20

Add materials	Breathability (cm3/min) (Thickness 1.5mm)	sealing performance (Thickness 1.5mm)		Sealing constant
		N2 m1/hr	Bumming oil A m1/hr	"M" factor	"Y" Tight compression ratio
Carbon steel sprint board	<=0.8	thirty	<0.5	three	nine thousand
SS304, SS316 sprint board	<=0.8	sixty	<0.5	two point five	four thousand
SS304, SS316 tablets	<=0.4	thirty-five	<0.5	two	nine hundred
Ss304, mesh plate	≥1.0	seventy	<0.5	three	five thousand

BSM1020-A Basic Reinforced Graphite Gasket	BSM1020-B package inner edge reinforced graphite gasket
BSM1020-C package outer reinforced graphite gasket	BSM1020-D inner and outer edge reinforced graphite gasket

The edge wrapping form of graphite composite gasket not only maintains the excellent performance of the original gasket, but also facilitates installation and disassembly, is not easily damaged, and can prevent the erosion of the gasket by the medium, thus improving the pressure resistance. The commonly used edging material is 304 or 316 stainless steel.

Available specifications: Thickness 0.5/0.8/1.0/1.5/2.0/3.0 (mm)
Length x width ≤ 2000mm x 2000mm (diameter ≤ 2000mm)
(Other sizes and thicknesses to be discussed separately)