PZ series water swelling waterstop stripDetailed product description：

PZ series water swelling waterstop products - Expansion rubber - Physical properties (BF) GB/T18173.3-2002

serial number	project		indicator
			PZ-150	PZ-250	PZ-400	PZ-600
one	Hardness (Shore A)/Degree 50-60		42±7		45±7	48±7
two	Tensile strength/MPa 2.5-3.97 ≥		three point five		three
three	Tensile elongation at break/% ≥		four hundred and fifty		three hundred and fifty
four	Volume expansion ratio/% ≥		one hundred and fifty	two hundred and fifty	four hundred	six hundred
five	Repeated immersion test	Tensile strength/MPa ≥	three		two
		Tensile elongation at break/% ≥	three hundred and fifty		two hundred and fifty
		Volume expansion ratio/% ≥	one hundred and fifty	two hundred and fifty	three hundred	five hundred
six	Low temperature bending (-20 ℃ × 2h)		crack-free
Note: 1. Hardness is a recommended item. 2. Finished product slice testing should reach 80% of this standard. 3. The tensile strength index of the joint part should not be less than 50%

Physical properties of putty type expanded rubber (BW) GB/T18173.3-2002

serial number	project	indicator
		PN-150	PN-220	PN-300
one	Volume expansion ratio/% ≥	one hundred and fifty	two hundred and twenty	three hundred
two	High temperature flowability (80 ℃ × 5 h)	No flowing	No flowing	No flowing
three	Low temperature test (-20 ℃ × 5 h)	crack-free	crack-free	crack-free
1) The inspection results should indicate the testing method.

PZ series water swelling waterstop strip