C102N Carbon film direct sliding potentiometerDetailed product description：

C102N Carbon film direct sliding potentiometer

Electrical Characteristics
Full resistance: 500 Ω -1M Ω
Full resistance tolerance: ± 20%
Impedance characteristic types: A, B, C, D
Noise: Less than 100mV at 20 mm/sec
Insulation impedance: More than 10M Ω at DC 250V
Voltage endurance: 1 minute at AC 250V
Residual resistance: Term.1~2: Less than 10 Ω Term.2~3: Less than 10 Ω
Synchronization error (dual): -40dB~0dB ± 3dB
Rated Voltage
B Linear: 10mm, 15mm: AC 100V 20mm, 25mm: AC 200V 30mm: AC 250V
Other linear: 10mm, 15mm: AC 50V 20mm, 25mm: AC 150V 30mm: AC 200V
Rated power (single/double)
B Linear: 10mm, 15mm: 0.05W/0.025W 20mm, 25mm: 0.1W/0.05W 30mm: 0.2W/0.1W
Other linear: 10mm, 15mm: 0.025W/0.012W 20mm, 25mm: 0.05W/0.025W 30mm: 0.1W/0.05W
mechanical properties
Force: 5-200 gf.cm
Central detachment force: 10~400 gf.cm
Stop strength: 3.0Kgf.cm Min (from the base level to a point of 2mm)
Sliding handle horizontal shaking amount: 2 (2xL)/20mm Max. (L: Level length both sides)
Horizontal push-pull strength: 3.0 Kgf Min. at 5 seconds
Durability
Rotation lifespan: 10000 cycles

Category	single couplet	Material	Carbon film
Performance	power	Resistance adjustment method	Direct sliding type
Resistance change mode	Logarithmic equation	Nominal resistance value	500Ω-1M
rated power	0.1（W）	allowable deviation	±0.005（%）
Sliding noise	100（V）	resolution	50（%）
Zero position resistance	10（Ω）	contact resistance	50（Ω）
insulation resistance	100（MΩ）