Electrical characteristics of RV149-SU rotary potentiometer

Full resistance: 500 Ω -1M Ω
Full resistance tolerance: ± 20%
Impedance characteristic types: A, B, C, D
Maximum operating voltage: B Linear: AC200V, Other Linear: AC150V
Rated power: Single Unit: B Linear: 0.2W, Other Linear: 0.1W
Rated power: Dual Unit: B linear 0.125W, other linear 0.06W
Noise: Less than 100mV
Insulation impedance: More than 100M Ω at DC 500V
Voltage endurance: 1 minute at AC 500 V
Single link for dimmer: 1 minute at AC 1500V
Residual resistance: Term.1~2: Less than 20 Ω Term.2~3: Less than 20 Ω
Synchronization error (dual): -40dB~0dB ± 3dB
Switch circuit: S.P.S.T
Switch contact impedance: Less than 50m Ω
Rated power of switch: Single Unit: 1.0A at AC/DC 12V
Single link for dimmer: 2.0A at AC/DC 125V

mechanical properties
Full rotation angle: 300 ± 5 degrees
Rotation distance: 20~200 gf.cm
Rotation stop strength: 7.0Kgf.cm Min
Push pull strength: 8Kgf Min
Number of rotation stages: Center Deternt 1C, 11C, 21C, 41C
Switch rotation angle: 35 ± 10 (degree)
Switching force distance: 150~500 gf.cm

RV149-SU rotary potentiometer