CA8010 Analog oscilloscopeDetailed product description：

CA8010 analog oscilloscope is a dual track 10MHz oscilloscope
Peak to peak automatic synchronization function: stable waveform can be obtained without adjusting the voltage level
Alternating triggering function: can stably display two unrelated frequency signals at the same time

Technical specifications

Effective bandwidth working surface (oscilloscope tube)	8×10DIV 1DIV=10mm
Acceleration voltage (oscilloscope)	+3kV
Luminous color (oscilloscope)	green
Sensitivity (Z-axis input)	5V
Input polarity (Z-axis input)	Low level illumination
Frequency range (Z-axis input)	DC：0-1MHz
Input resistance (Z-axis input)	10kΩ
Maximum input voltage (Z-axis input)
Bandwidth (-3dB)	DC：0-10MHz AC：10Hz-10MHz
Method (Vertical System)	CH1、CH2、ALT、CHOP、ADD
Input impedance (vertical system)	1MΩ±3% 25pF±5pF
Input coupling (vertical system)	DC-GND-AC
Polarity reversal (vertical system)	Only CH2
Maximum input voltage (vertical system)	400V（DC+ACpeak）
Deviation factor (vertical system)	5mV/DIV-5V/DIV±3%
Fine tuning ratio (vertical system)	2.5 : 1
Time factor (horizontal system)	0.5S/DIV-0.2µS/DIV±3%
Fine tuning ratio (horizontal system)	2.5 : 1
Method (trigger system)	AUTO、NORM、TV、P-P AUTO
Trigger source (trigger system)	INT（CH1、CH2、VERT MODE）、LINE、EXT
Slope (trigger system)	Positive or negative
Trigger sensitivity (trigger system)	INT：1DIV、EXT：0.3V、VERT MODE：2DIV、P-P AUTO：2DIV
TV (trigger system)	2DIV
Maximum input voltage (trigger system)	160V (DC+ACpeak) external trigger input
Input impedance (trigger system)	1MΩ±3% 25pF±5pF
Deflection factor (X-Y operation)	Same vertical system
Bandwidth (-3dB) (X-Y operation? /td>	DC：0-1MHz AC：10Hz-1MHz
Phase difference (X-Y operation)	≤3°（DC：0-50kHz）
Probe calibration (calibration source)	1kHz ± 2% 0.5Vp-p ± 2% symmetrical square wave
Voltage range (power supply)	220V±10%
Frequency (power supply)	50Hz±2Hz
Maximum power consumption (power supply)	40W

Product dimensions:

Length 428mm, width 320mm, height 130mm, weight 6.5Kg