JP41F-16 flange balancing valveDetailed product description：

JP41F-16 flange balancing valve

Name: Balance Valve
Model: KPF
Caliber: 20-300MM
Pressure: 1.6-6.0Mpa
Temperature: ≤ 425 ℃
Materials: stainless steel, carbon steel, cast iron
Design standards: JB, GB, ANSI, BS, API, ISO, DIN, NF

Product Introduction
JP41F-16 flange balancing valve is a valve with special functions, which has good flow characteristics, valve opening indication, opening locking device, and pressure measuring small valve for flow measurement. By using the Zhiyong intelligent instrument to input the valve model and opening value, as long as appropriate balance valves are installed in each branch and user inlet, and a dedicated intelligent instrument is used for one-time debugging, the flow rate of each user can reach the set value, thereby achieving hydraulic balance of the system. At the same time, by installing a balance valve, the total water volume of the system can be controlled within a reasonable range, thereby overcoming the non proportional operating conditions of "large flow, small temperature difference". 2、 Installation and use of balance valve: The installation position of balance valve can be installed on the water supply pipe or the return pipe. We generally recommend installing it on the return pipe, especially for high-temperature ball loops. For the convenience of debugging, it should be installed on the return pipe. If a balance valve is installed on the supply (return) water pipe, there is no need to install a shut-off valve.