BFWE type proportional directional valve
| specification |
Diameter 6 |
Diameter 10 |
| Installation location |
Any, it is recommended to prioritize horizontal installation |
| Storage temperature (℃) |
-20~80 |
Environmental temperature for use
|
BFWE (℃) |
-20~70 |
| BFWNE (℃) |
-20~50 |
| Weight (Kg) |
BFWE kg |
two point two |
six point three |
| BFWNE kg |
two point four |
six point five |
Hydraulic parameters (measured at p=100bar, mineral oil HLP4, 40 ℃± 5 ℃)
| work pressure |
Oil ports A, B, P bar |
Up to 315 |
| Oil port T bar |
Up to 210 |
| Rated flow rate at p=10 bar L/min |
eight |
twenty-five |
| sixteen |
fifty |
| thirty-two |
seventy-five |
| Maximum allowable flow rate L/min |
eighty |
one hundred and eighty |
| working medium |
Mineral oils (HL, HLP) that comply with DIN51524 standards can be used with other fluids. Please consult us! |
| Medium temperature range ℃ |
-20~80 (preferably 40~50) |
| Medium viscosity range mm2/s |
20~380 (preferably 30~46) |
| Oil cleanliness |
Recommended filter minimum filtration ratio for the highest pollution level of oil according to ISO 4406 (C) 20/18/15 1) |
| Hysteresis% |
≤0.1 |
| Reverse error% |
≤0.05 |
| Repetition accuracy% |
≤0.05 |
Zero displacement will vary according to changes in pressure oil, temperature, and operating temperature
|
%/100 K |
zero point one five |
| %/100 bar |
zero point one |
BFWE type proportional directional valve