JCDG-H Type Fully Automatic Capacitor and Inductance TesterDetailed product description：

The JCDG-H fully automatic capacitance and inductance tester has the characteristics of small measurement workload, fast and convenient, stable performance, accurate measurement, and high fault detection rate. In addition, its current measurement unit can also be used for measuring electrical equipment such as CVTs and lightning arresters, with the function of one machine with multiple functions.

Characteristics of fully automatic capacitance and inductance tester
1. Measure the capacitance of a single or entire group of parallel and collective capacitors without disconnecting the wires.
2. Measure the inductance of reactors and wave blockers without disconnecting the wires.
3. Measure the inlet capacitance of transformers and generators without disconnecting the wires.
4. It has the function of measuring parallel (discharge) resistance values.
5. It can compensate for the problem of low fault detection rate caused by low output voltage of the capacitance meter.
6. Synchronize the display of voltage and current waveforms and phases, and calculate the power loss of the measured capacitor.

JCDG-H type fully automatic capacitance and inductance tester parameters
1. Capacity range: 0.2 μ F to 2000 μ F; Capacity range: 5-20000 kvar; Measurement accuracy: 0.2 μ F to 2 μ F ± 1% reading ± 0.02 μ F;
2 μ F to 2000 μ F ± 1% reading ± 2 words;
2. Inductance range: 1mH to 9.99H; Measurement accuracy: ± 1.5% reading ± 2 words
3. Output measurement voltage: AC 26V/500VA; 50Hz；
4. Display mode: Large screen LCD display with full Chinese character output, TP μ p-40 panel thermal printer
5. Appearance/Weight: 370 × 370 × 220 mm/10 kg
6. Working conditions:
a. Environmental temperature: 0 ℃~+40 ℃, relative humidity: ≤ 90%
b. Power supply: AC 220V ± 10%; 50Hz；