JCDL-H Type Fully Automatic Capacitor Current TesterDetailed product description：

The JCDL-H fully automatic capacitance current tester directly measures the capacitance current of the distribution network from the secondary side of the PT. Compared with traditional testing methods, this instrument does not need to deal with the primary side, so there is no risk of testing. There is no need to take complicated safety measures or wait for lengthy calibration commands. Simply connect the measurement line to the open triangular end of the PT to measure the capacitance current data.

Due to the injection of weak out of frequency test signals from the PT opening triangle, it will not have any impact on the relay protection and PT itself, and avoids 50Hz power frequency interference signals. At the same time, the output terminal of the tester can withstand 100V AC voltage. If a single-phase ground fault occurs during measurement, it will not damage the PT and tester. Therefore, no special safety measures are needed, making this work safe, simple, fast, and the test results accurate, stable, and reliable.

characteristic
1. The tester adopts a large screen LCD display, a Chinese menu, and is very easy to operate. It is also small in size and light in weight, making it easy to carry for outdoor operations
2. Simple wiring, fast testing speed, high data accuracy, greatly reducing the labor intensity of testers and improving work efficiency

Technical parameters of JCDL-H fully automatic capacitance current tester

1. Measurement range: Total capacitance to ground ≤ 120 μ F (three-phase to ground)
Capacitor current ≤ 500 A (35kV system) Capacitor current ≤ 200 A (10kV system)
2. Measurement accuracy: ± 5% (capacitance ≤ 90 μ F) ± 10% (90 μ F ＜ capacitance ≤ 120 μ F)
3. Working temperature: -10~50 ℃
4. Relative humidity: ≤ 90%
5. Working power supply: AC 220V ± 10% 50 Hz ± 1%
6. Dimensions: 350 × 200 × 150 mm
7. Instrument weight: 10 kg