SSF Type Triple Frequency Power Generator DeviceDetailed product description：

The SSF type triple frequency power generator device is designed to meet the requirements of GB1094.3-85, GB1207, and the Preventive Testing Regulations for Electrical Equipment -1995 for triple frequency induction withstand voltage test and partial discharge test. The induction withstand voltage test of transformers and mutual inductors is an important test to verify whether the product complies with national standards. The longitudinal insulation induction test of interlayer, turn to turn, section to phase insulation of windings is an important item to test whether the windings meet the requirements. In order to increase the test voltage of the winding and prevent the iron core of the transformer or transformer from supersaturating and causing excessive excitation current, the test frequency needs to be increased, generally from 100Hz to 400Hz.

Technical parameters
1. Environmental temperature: -25 ℃ -55 ℃
2. Altitude: not exceeding 4000 meters
3. Used for AC induction withstand voltage testing of voltage transformers, motors, and transformers to assess the master-slave insulation strength, and can also be used as a 150Hz power supply for short-term operation.
4. Input voltage: AC380V50Hz
5. Output voltage: 300V-500V (0-5kV according to requirements) Voltage>300V requires external boosting equipment
6. Waveform distortion:<5%
7. Output capacity: 3kVA-150kVA

Application environment of SSF type triple frequency power generator device

1. Power supply conditions: three-phase 380V/50Hz
2. Output voltage: 50-500V (maximum 750V), 150Hz;
100-1000V (maximum 1500V), 150Hz;
3. Capacity: 1-1000KVA;
4. Waveform: sine wave, distortion less than 1%;
5. Load characteristics: resistive, inductive, capacitive are all acceptable;