| Product name: | ZCGL Ultra high temperature solenoid valve | ||||||
| specification: | ![]() |
||||||
| Category: | Pump valve fittings -- solenoid valve | ||||||
| Price: | factory price | ||||||
| Brand: | Shanghai | ||||||
| Place of Origin: | China | ||||||
| Available Quantity: | batch | ||||||
| delivery cycle: | Spot goods (or inquire by telephone) | ||||||
|
|||||||
|
Operation method |
normally closed |
Power on to turn on, power off to turn off | ||||||||||||||
|
Normally Open |
Power on/off/power off/on (indicated by adding "- K" after the model) | |||||||||||||||
|
Parameters ↓ Model → |
ZCGL | |||||||||||||||
|
medium temperature |
≤450℃ | |||||||||||||||
|
Using media |
Superhigh temperature liquids or gases such as superheated steam, hot air, and high-temperature heat transfer oil | |||||||||||||||
|
Diameter (mm) |
fifteen |
twenty |
twenty-five |
thirty-two |
forty |
fifty |
sixty-five |
eighty |
one hundred |
one hundred and twenty-five |
one hundred and fifty |
two hundred |
two hundred and fifty |
three hundred | ||
|
Connection size (G) |
1/2 |
3/4 |
one |
1-1/4 |
1-1/2 |
two |
||||||||||
|
Pressure (MPa) |
0.04~1.6 |
0~1.6 | ||||||||||||||
|
power |
AC:40W、DC:45W | |||||||||||||||
|
voltage deviation |
Allow fluctuation of ± 10% | |||||||||||||||
|
Material |
valve body |
stainless steel | ||||||||||||||
|
seal |
Super strong polytetrafluoroethylene PTFE · metal hard seal | |||||||||||||||
|
Ambient temperature |
-40~80℃ | |||||||||||||||
|
connection method |
Internal thread flange | |||||||||||||||
|
electrical connection |
Junction box cable socket, wiring method as shown in Figure 3 on page 68, protection level IP65 | |||||||||||||||
|
Operating voltage |
AC220V 50Hz/60Hz, DC: 24V · Other according to requirements | |||||||||||||||
|
Special Optional |
BZCGL explosion-proof solenoid valve |
ZCGL-F | ||||||||||||||
|
Explosion proof grade: dIIBT4, dIICT5 (including hydrogen) |
flange connection | |||||||||||||||
|
Installation Instructions |
The coil is vertically upward | |||||||||||||||
|
Remark |
The normally open valve needs a pressure difference of at least 0.1Mpa to fully open or close | |||||||||||||||
ZCGL ultra-high temperature solenoid valve