Z-1200XP desktop ozone detectorDetailed product description：

Z-1200XP is a portable desktop ozone gas concentration measurement and analyzer with a resolution of 0.01ppm and a range of 0-10ppm. The LCD screen outputs the current concentration of ozone gas every 10 seconds, and the instrument can also calculate the average value over the past 15 minutes and up to 8 hours. These data can be viewed at any time during the measurement process. The built-in pump can be equipped with a probe for independent sampling. The data storage device stores all measurement points used each time, with a maximum storage capacity of 14400 measurement points, equivalent to 5 separate 8-hour measurements. The data can be downloaded to a personal computer through software.

Z-1200XP is an electrochemical unit used in measuring components. Each unit uses four types of electrodes and includes a working electrode and an active compensating electrode. The signal uses temperature compensation through compensating electrodes to improve the selectivity of the entire sensor, which can measure the concentration of ozone gas in the air in a straight line.

Z-1200XP desktop ozone detector technical parameters:
Sensor: Electrochemistry
Range: 0~10ppm
Overload: 10ppm
Resolution rate: 0.01ppm
Response time: less than 30 seconds
Output accuracy: less than 1%
Sensitivity error: less than 2%
Working temperature: -40~50 degrees Celsius
Working humidity: 15-90% non condensing
Size: 190mm * 146mm * 70mm
Weight: 900 grams
Power supply method: internal rechargeable battery or 220V AC power supply
Battery working life: 9 hours
Sensor working life: greater than 2 years