MFT Multi functional frequency and speed measuring instrumentDetailed product description：

MFT multifunctional frequency speed measuring instrument is a high-precision frequency speed measuring instrument composed of multifunctional frequency speed measuring software and USB-002 frequency speed collector; Equipped with frequency/speed steady-state measurement and transient measurement functions, with USB serial communication, capable of matching with NPN-OC output switch type speed sensors; In addition to measuring and calibrating general rotational speed, linear velocity, and frequency, it can also measure and calibrate ultra-low and ultra-high speeds. Automatically record measurement data and print measurement reports based on the data; It has wide applicability in measurement and calibration, and flexibility in functional use.

MTF multifunctional frequency and speed measuring instrument, mainly used for high-precision testing or calibration of speed and frequency by legal metrology testing institutions; It is also widely used in factories and laboratories for measuring, recording, and analyzing frequency and speed.

Main technical characteristics of MFT multifunctional frequency and speed measuring instrument
1. Power supply: AC 220V
2. Power consumption: not exceeding 3W
3. Input signal: 0-10kHz (low-frequency channel)
0-100MHz (high-frequency channel)
4. Basic error: 5 × E-6 (frequency steady state) 3 × E-5 (speed steady state) 1 × E-3 (transient measurement)
5. Operating environment: Temperature -20~65 ℃, relative humidity ≤ 85%
6. Weight: less than 1000g (excluding attachments)

Main functions and features of MFT multifunctional frequency and speed measuring instrument
1. Main functions and features
MFT multifunctional speed measuring instrument, with two photoelectric isolation inputs, one TTL input, and USB serial communication and other access functions. The specific functions are listed below for users to refer to when selecting.
Main functions:
1. High frequency measurement: 0-100MHz
2. Low frequency measurement: 0-10kHz
3. Dual speed measurement: 0-300000 r/min
4. Two point speed measurement: 0-200m/s
5. Frequency measurement and counting: 1 to 1000000000
Main features:
1. Accurate and reliable: Input standard signal, test record 1000000, no deviation
2. Measurement of ultra-low speed: The lowest frequency can reach 0.01Hz
3. Measuring ultra-high speed: The maximum speed can reach 600000r/min
4. Dynamic testing records: In conjunction with software, speed changes can be dynamically recorded, with a minimum refresh (sampling) time of 10mS
5. Multiple sets of parameters: can be queried/modified through a computer and saved for a long time

MFT Multi functional frequency and speed measuring instrument（No image available）