CJ9366 Pressure sensorDetailed product description：

Characteristics of CJ9366 pressure sensor
Measurement range: 0~6KPa~2MPa
Silicon piezoresistive core HT20 is a sensitive component
High reliability, good stability, small size, lightweight structure
Full 316L stainless steel

Application of CJ9366 pressure sensor
Non corrosive gas and liquid pressure measurement for 316L stainless steel
process control system

Performance parameters of CJ9366 pressure sensor

measurement range	0~10KPa~2MPa
Zero position output	＜2 mV
Full range output	DC100±20 mV
Positive overvoltage	2 times full scale
Negative terminal overvoltage	1x full scale or 1MPa (take the minimum value)
Static pressure	≤20MPa
accuracy	± 0.25% (typical) ± 0.5% (maximum)
long-term stability	± 0.3% F.S/year (typical) ± 0.5% F.S/year (maximum)
Pressure interface	M12 × 1 or user selectable
compensation temperature	0℃~70℃
Operating Temperature	-10℃~80℃
Storage temperature	-40℃~100℃
Shell material	Stainless steel 1Cr18Ni9Ti
Diaphragm material	316L
O-ring	fluororubber
cable	polyethylene
insulation resistance	100MΩ,100VDC
Shell protection level	IP65

Selection Tips
To ensure the safe and reliable operation of the sensor, it is recommended to install a three valve group between the measured point and the sensor to ensure that the measured medium is slowly and evenly added to the positive and negative pressure chambers of the differential pressure sensor.
It is recommended to install the small range differential pressure sensor horizontally.
When using, pay attention to whether the range and static pressure resistance of the differential pressure sensor meet the corresponding requirements of the measured differential pressure point.
It is strictly prohibited for the negative pressure chamber to be compressed higher than the positive pressure chamber.