IMC-F Fluoroplastic Magnetic PumpDetailed product description：

IMC-F Fluoroplastic Magnetic Pump

1. The lining inside the pump body, the rotor inside the impeller, and the isolation sleeve are all made of pure F46 material by one-time molding, without impurities precipitation, which is very suitable for transporting high-purity and highly corrosive chemical liquids;
2. The pump body shell is made of ductile iron, and the pump body is designed with flanges according to national standards. It has excellent mechanical strength and can withstand heavy pipeline loads;
3. The inner lining of the overcurrent component is made of F46 material, which has six smooth and smooth channels, superior hydraulic performance, low hydraulic friction loss, and high efficiency;
4. The pump shaft, bearing sleeve, and dynamic and static rings are all made of pressureless sintered silicon carbide, which has the characteristics of high hardness, high wear resistance, and high corrosion resistance;
5. The unique spiral groove design in the inner hole of the bearing sleeve makes lubrication of the sliding bearing pair more convenient and easier to remove the heat generated by friction during pump operation;
6. A reinforcement cover specially made of imported material PPS is added outside the isolation sleeve, which enables the pump unit to withstand higher system pressure and eliminate the heat generated by the metal sleeve due to magnetic eddy currents;
7. The inner and outer magnets are made of neodymium iron boron material, with a magnetic steel surface of up to 3600 Gauss, which can smoothly transmit the torque of the prime mover to the impeller without slipping under high flow conditions. It can also prevent the rotor inside the impeller from contacting the rear thrust ring, thereby preventing the melting of fluoroplastic components due to frictional heating and ensuring the normal operation of the magnetic pump in highly corrosive environments;
8. The entire pump unit adopts a rear pull structure, which allows one person to carry out internal maintenance and parts replacement without dismantling the pipeline.

Technical parameters of IMC-F fluoroplastic magnetic pump
Flow rate: 1.8-100m3/h;
Lift: 8-50m;
Speed: 2900r/min;
Power: 0.12-45kw;
Caliber: 12-125mm;
Applicable temperature: -20-100 ℃.